At present, half of the domestic ski resorts have begun to operate, and the temperature in the central and southern regions can reach the snow making temperature in less than a month. So, when the snowmaker enters the ski resort, how to operate it?
滑雪场所有的事情都已经准备到位以后，造雪机进入滑雪场我们需要做以下三点来进行造雪，同时，操作好这几个点也是造雪机能否正常造雪的关键。
After everything in the ski resort is ready, we need to do the following three points to make snow when the snowmaker enters the ski resort. At the same time, operating these points well is the key to whether the snowmaker can make snow normally.
一、等。
First, wait.
等温度，等湿度，等水电就位。这么一个字概括了造雪机造雪的必要条件，气温达到0℃以下，湿度不能过于高，水要达到5℃以下，电要用380V三相电。
Equal temperature, equal humidity, and water and electricity in place. Such a word sums up the necessary conditions for snow making by snow making machine. The temperature should be below 0 ℃, the humidity should not be too high, the water should be below 5 ℃, and the electricity should use 380V three-phase electricity.
二、调。
Two, tune.
调试造雪机，测试其各个部件的真实情况。这个造雪机厂家人员会现场操作，一来真实的造出雪来让滑雪场放心，二来可以教会造雪工如何操作。
Debug the snowmaker and test the real situation of its components. This snowmaker manufacturer's personnel will operate on the spot, one is to make real snow so that the ski resort can rest assured, the other is to teach the snowmaker how to operate.
三、清。
Three, Qing Dynasty.
造雪机的清理工作是必不可少的环节。俗话说，细节决定成败。对于造雪机来说这句话是完全适用的。造雪机的清理工作做到位不仅可以让造雪机事半功倍，并且造雪质量也会大大提升，对于造雪机的机体也会有一个很好的保护。对于滑雪场来说，造雪量大有多么重要不言而喻。
The cleaning work of snowmaker is an essential link. As the saying goes, details determine success or failure. This sentence is fully applicable to snow making machines. The cleaning work of snow making machine can not only make the snow making machine more efficient, but also greatly improve the quality of snow making machine, which will also have a good protection for the body of snow making machine. For ski resorts, it is self-evident how important it is to make a lot of snow.
做好这三点造雪机就可以正常高效的造雪了，另外，造雪机厂家会对造雪工进行详细的培训工作，确保在造雪的过程中能够正确的对造雪机进行维护保养操作。sdjy-zb-sdjy
In addition, the snowmaker manufacturer will provide detailed training to the snowmaker to ensure that the snowmaker can be properly maintained in the process of snowmaking.
